TI Thermo Valve with interchangeable cartridges

For supermarket cases, walk-in coolers & ice machines applications:
TI[E] thermo valves feature interchangeable cages that provide the capability of changing capacity with the change of a cage. Simply change the easy-to-use cartridges to achieve desired capacity.

• Maximum working pressure: 450psig [3100 kPa]
• 500 hour salt spray resistance per ASTMB117
• Capacities rated in accordance with ARI 750 standards
• Mass spectrometer tested to ensure less than 0.1oz / year R22 [2.5 E-5 std atm/cc/sec] external leakage rate.

Eco-Cool refrigeration rack.

Best in class technology

The next time you're installing an EK Filter Drier, make sure you're installing a genuine EK Filter Drier from Emerson Climate Technologies Flow Controls.




Leading Oil Separators

Replaceable filter drier blocks and filter cores with STAS

To prevent contamination, do not open can until ready to install.

1. Pump down the system and the STAS completely. Warning: System lines must be de-pressurized before attempting to service. Failure to do so can result in system damage and serious bodily injury.
2. Remove the cover bolts, cover, and cover gasket (discard old gasket).
3. Withdraw the internal assembly by pulling on the handle.
4. Disassemble the internal assembly by unscrewing the handle while holding the inlet retainer.
5. Remove contaminated filter-drier block. For multiple block units, remove couplings.
6. Clean all internal parts thoroughly, giving particular care and attention to outlet screen.
7. Remove the block from can and reassemble as rapidly as possible to minimize moisture contamination.
8. Replace the screen in the outlet retainer and install the new block or core in the outlet retainer. Make certain that the end of the block with the tapered inside diameter is placed against the outlet retainer. With multiple block units, place coupling between each block or core. Position the inlet retainer over the final block or core, and screw the handle firmly in place. Carefully insert the assembled unit into the shell assembly.
9. Lightly coat the new cover gasket with refrigeration oil on both surfaces and carefully place in the groove of the cover.
10. Push the cover against the shell assembly. Make certain that the compression spring is against the inlet retainer, and is not handing up on the handle.
11. Install 2 cover bolts diagonally opposite holes to hold the cover snugly against the shell edge. Install the remaining bolts snugly.
12. Torque all cover bolts evenly in a criss-cross pattern to a torque of 25ft. lbs. maximum for STAS units. For stainless steel bolts in SV series suction line service, the maximum torque is 20ft.lbs.
    
13. Test for leakage.
    

Check Valves

The ACK check valve is a normally closed magnetic check valve that prevents reverse refrigerant flow in liquid lines and compressor discharge lines.

FEATURES:

• Copper connection sizes: 1/4" through 2-5/8"
• Hermetic spun copper design
• Near zero internal leak rate
• Magnetic checking action
• Built in 30 mesh stainless steel strainer
• Can be installed in any position
• UL/CUL file number : SA 5312

NOMENCLATURE:
ACK 4 - Check valve series Copper ODF connection sizes 1/4 ODF [in 1/16"]

Download information here.

HX-48 ULTRA HIGH CAPACITY DRIER CORE

For universal replacement. 48 cubic inch desiccant block for use with CFC, HCFC's, HFC's, mineral oil and POE.
100% molecular sieve provides the highest moisture removal for all typical liquid and suction line applications.
Moisture capacity at 75 deg F [24 C] [ Drops of H2O]:
R22 - 1373
R134a - 1565
R404A - 1416

Available at your local wholesalers.

Competitive Cross Reference

Emerson Flow Controls is proud to offer this exclusive tool. The Competitive Cross Reference provides a cross to the Emerson product from a number of competitors, including Sporlan, Danfoss, Castel, Henry, Parker, Virginia, A-1 Components, and AC&R Supply. For assistance, contact your local wholesaler.
*Tip: Try entering a broad description. For example, search for SA to find SA-14SU.
Enter as much of the competitor's part number as you know and click Search.